1- Dry bricks ballast, 1.5” down, or dry stone aggregate 0.5” down blended with sand to fill voids, and compacted.
2- Sand base maximum 2” thick.
3- After Concrete-Pavers have been installed, a layer of sand approx.. 1 to 2 cm is given on top, 2 to 3 of a vibrating compactor are then made over pavers. Sand is brushed into any residual joints and excess sand removed.
4- Retaining edge pavers.
5- 1:2:4 to stabilize retaining edge pavers.
Natural Grey, Red, Black & Yellow.